giovedì 26 novembre 2015

Newrez su Centos 6

Un po' per pigrizia utilizzo lo script newrez (gia' descritto qui) per avere una risoluzione personalizzata su portatili un po' vecchiotti (1024x768 oramai e' un po' troppo riduttiva come risoluzione

Attualmente ho montato una Centos 6 su un ToughBook ed ho scoperto che lo script non funziona.
La cosa e' facilmente risolvibile eseguendo il comando xrandr
Newrez si aspetta di dover gestire LVDS1 e VGA1 mentre su Centos lo schermo del portatile viene chiamato LVDS-0

-------------------------------------------------------------------------
Screen 0: minimum 320 x 200, current 1600 x 1000, maximum 4096 x 4096
LVDS-0 connected 1600x1000+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768       60.0*+
   800x600        60.3     56.2 
   640x480        59.9 
VGA-0 disconnected (normal left inverted right x axis y axis)
   1600x1000      59.9 
TV-0 unknown connection (normal left inverted right x axis y axis)
   848x480        59.9 +
   640x480        59.9 +
   1024x768       59.9 
   800x600        59.9 
-----------------------------------------------------------------------------

basta modificare lo script e tutto torna a funzionare (certo che 1600x1000 su uno schermo da 10 pollici e' un po' troppo per gli occhi)
------------------------------------------------------------
#!/bin/bash

# newrez

# Marc Brumlik, Tailored Software Inc, tsi-inc@comcast.net

# up to v 0.8
# use 'xrandr' to scale video output to the display

# v 0.9
# Wed Jan  2 05:23:54 CST 2013
# rewrite to handle mouse boundaries when scaled (mouse confined)
# by setting requested resolution to the unused VGA-0 device
# then scaling that for display on the LVDS-0 device

# v 1.1
# Fri Dec 20 08:28:08 CST 2013
# fixed issue where setting to "default" after some other resulution
# left mouse-area at prior resolution

umask 000

# resolution can optionally be specified on command line
newrez=$1

# we MUST be running xrandr 1.3 or higher
if xrandr -v | grep "RandR version 1.[012]"
    then    zenity --info --title="XRandR version is too old" --text="You must be running Xrandr
version 1.3 or newer!
Time to upgrade your system  :-)"
        exit 0
fi

# find the currently connected devices, make a list
devices=`xrandr -q | grep connected | grep -v disconnected | cut -d"(" -f1`

# there MUST be a "connected" LVDS-0 and a "disconnected" VGA-0
current=`xrandr -q`

if echo "$current" | grep "LVDS-0 connected" >/dev/null
    then    : OK
    else    zenity --info --title="PROBLEM" --text="Current display must be LVDS-0"; exit 0
fi
if echo "$current" | grep "VGA-0 disconnected" >/dev/null
    then    : OK
    else    zenity --info --title="IMPORTANT" --text="The VGA-0 display resolution may be affected by this change"
fi

default=`echo "$current" | grep -A 1 "^LVDS-0" | tail -1 | awk '{print $1}'`
H=`echo $default | cut -d'x' -f1`
V=`echo $default | cut -d'x' -f2`
HZ=`echo $default | awk '{print $2}' | tr -d '[*+]'`

# echo DEFAULT: $default $H $V

if [ -z "$newrez" ]
    then    while true
        do
            newrez=`zenity --entry --title="Set New Resolution" \
                --text="Default Resolution: $default\n\nNew size (eg 1280x750 or 1450x1000)\n   -or- \"default\""` || exit 0
            case $newrez in
                default|[0-9]*x[0-9]*)    break ;;
            esac
        done
fi

case $newrez in
    default)    xrandr --output LVDS-0 --mode $default --scale 1x1
            xrandr --addmode VGA-0 $default
            xrandr --newmode $default $newmode
            xrandr --output VGA-0 --mode $default --scale 1x1
            exit 0 ;;
esac

newH=`echo $newrez | cut -d'x' -f1`
newV=`echo $newrez | cut -d'x' -f2`
modeline=`cvt $newH $newV $HZ | grep Modeline`
newmode=`echo "$modeline" | sed 's/^.*"//'`
cvtrez=`echo "$modeline" | sed -e 's/_.*//' -e 's/^.*"//'`

if [ "$newrez" != "$cvtrez" ]
    then    newrez=$cvtrez
        newH=`echo $newrez | cut -d'x' -f1`
        newV=`echo $newrez | cut -d'x' -f2`
fi

scaleH=`echo -e "scale=10\n$newH / $H\nquit" | bc`
scaleV=`echo -e "scale=10\n$newV / $V\nquit" | bc`

if echo "$current" | grep -A 100 "^VGA-0" | grep $newrez >/dev/null
    then    : already there
    else    xrandr --newmode "$newrez" $newmode
        xrandr --addmode VGA-0 $newrez
fi

if xrandr --output VGA-0 --mode $newrez --output LVDS-0 --fb $newrez --scale $scaleH"x"$scaleV 2>&1 | tee -a /tmp/xrandr.err
    then    : success
    else    zenity --info --title="Xrandr produced this error" --text="`cat /tmp/xrandr.err`"

The problem could be that Your video driver
does not support xrandr version 1.3
        rm -f /tmp/xrandr.err
fi

Nessun commento:

Posta un commento

Dockerizza Flask

Un esempio semplice per inserire in un container Docker una applicazione Flask Partiamo da una semplice applicazione che ha un file app.py ...